keskiviikko 3. kesäkuuta 2015

Digital Inks - Wilf Mulberry, take one

Getting the Adonit Jot Touch Pixelpoint stylus was one thing - learning to draw with it was whole thing entirely. As I have mentioned, I'm not a complete stranger to digital drawing tools, having had a small Vacom pad back in the day when Macs still had their own interface for peripherals. But even then I did not even dream of actually drawing with it, at least for anything like line art. One of the reasons was simply that I liked - and still do - the tactile feel of using a real ink pen on paper, and those early Vacoms just could not offer that kind of precision and feedback I wanted. It had it's uses in colouring the illustrations, sure, but I never took the steps required to take it any further.

With Procreate, I decided to give the digital drawing another shot. Even though I mostly do stuff just to amuse myself these days, more often than not I end up using my drawings in one digital format or another, so getting there as soon as possible just makes sense. Well, okay, I also thought that I was perhaps a bit behind the times. Can't have that, now, can I?

The sketch layer if in light blue.
This way, I found it was easier
to tell the sketch apart from the inks.
So there I was, sitting with a stylus in hand, trying to find the courage to begin. 5th edition of Dungeons & Dragons had rekindled my interest in RPGs, so I thought that the most natural thing for me to get my feet wet was to draw a character portrait. I had made a quick sketch of a Gnome investigator, Wilf Mulberry, scanned it and imported it to the iPad. Then, using the stylus just as I would a regular ink pen, I started to draw the ink lines.

Pretty soon I realized that although drawing with stylus was kind of similar to traditional drawing, it still was a totally different tool and would take some time to master. The first hurdle was to was to customize a brush that would function somewhat similarly to the ink pens I'm used to. I also noticed that unlike pen and paper, fast strokes are easier to make and trace much more smoothly that slow, long ones. This is something I have found hard to adjust to, as it is quite counterintuitive to me.

Also, at times when I change drawing angle or orientation of the pad, new lines after that may be a couple of millimeters off. Since this happens also when I'm using my finger, this might be a limitation in the iPad itself, or might have something to do with the screen protector I've applied. It's annoying, but not a dealbreaker, especially as it is so easy to undo any 'wrong' lines. Too easy, in fact. I'm a bit worried that I grow too accustomed to 'editing' the lines. That's one thing I like about traditional inks, every line you make is a commitment.

These are, however, just minor niggles. Although the first drawing was a bit rough, it was still manageable and most importantly, ended up looking like something drawn by me. Inking in Procreate does take some adjustments to my regular style, but for example the fact that I need to learn to make more faster and decisive lines is something that will likely improve my style and workmanship on the whole. I also noticed that I might need to make my initial pencil sketches a bit more accurately than previously, so that I don't have to guess and redraw so much during the inking. The whole process was perhaps not as smooth as I would have hoped for, but neither was it discouraging, and I'm pretty sure this will not be the last time I'll dabble with digital inks.

sunnuntai 31. toukokuuta 2015

Procreate - most fun I've ever had with finger painting

Traditional inks coloured with fingerpainting, I haven't had this much fun with digital painting since I can't even remember when...



Ever since my wife and I got ourself an iPad, I've been itching to actually use it for something - anything, really, other than just as a glorified surf board. I wanted to try some drawing applications, and after searching for a while decided to give Procreate a try, since it seemed to get some nice reviews. The price was not too bad, even for something I might end up disliking, and the ability to export the work done in Procreate as actual, layered photoshop document sealed the deal for me.

Now, actual digital painting has always been beyond my grasp, so naturally I first wanted to try the program for something I would otherwise do in photoshop, like colouring my inked illustrations. aSince I still haven't dared to upgrade my venerable Mac Mini to Yosemite and hence can't fully utilize iCloud for syncing, I opened one of my inks via dropbox, and made that into a new document in Procreate. And much as I would do in photoshop, I then changed the layer containing the outlines to multiply, and then made a new layer for the colours. After that, it was just selecting right kind of shapes and sizes for the brushes, and swipe, swipe away with my fingers.

From the start, everything felt surpsisingly intuitive. Sure, there were things I had to check from the manual, such as making selections and locking -essentially masking - layers, but the main function of the program, drawing itself, felt very intuitive from the start. Zooming in, rotating, colouring and texturizing, then zooming out to get the big picture and zooming in again -that's how a paint program should function, and for the most part Procreate functions really well. Also the ease of use is staggering. If I want to make some adjustments, I can do that while laying on the bed or on the couch. also the feel and working style are more natural, more like traditional drawing, than with a Vacom and photoshop.

Eventually, I ended liking Procreate so much that I purchased a high-end, pressure-sensitive stylus, Adonit Jot Touch Pro, to actually do some drawing with Procreate. I still have some kinks to smooth out with that, to get the flow and feel of regular freehand drawing, but I'm on my way getting there.

More info on Procreate can be found here:


lauantai 30. toukokuuta 2015

Ruined Fieldstone Mo(u)ld - Hirst Arts Mold #75

All miniature stuff has been on the backburner for a while, but to keep myself at least somewhat honed, I recently purchased the Ruined Fieldstone Mold (Mould #75), by HirstArts. And after a couple of test castings, I must say that I’m much impressed with both the quality and the utility of this mould.

After recieving the mould, I had some doubts about my casting skills, as the mould has several quite deep and narrow bits, and I have previously had some difficulties with such features - not to mention that I had not done any casting for over a year or so. However, the combination of precise measurements in mixing the plaster, mould-tapping and poking and stirring with a toothpick, ensured quite smooth casting process, with only a minimal amount of air bubbles. The atmosphere might have been a bit damp and cold, as the plaster seemed to take somewhat longer than usual to set, but otherwise the casting went as smoothly as I could expect.

The five different sizes of arches that can be cast using 
this mould.
As for the casts themselves, I’m very impressed with the variety of pieces you get out of this mould. Utility and versatility are the main points when I decide whether I want to purchase a mould or not, and I have to say that of all the moulds I have so far, this one probably has the most utility. In fact, even though the casting might be somewhat challenging, I would recommend this mould as the first mould to start out. Just the fact that with this mould one can cast 5 different sizes of arches would put it at the ’must have’ -category, the rest of the pieces are just Icing on top of that. Although it would take a lot of castings, a great variety of ruined buildings could be quite easily build just by using pieces from this mould. I especially like that there are 1/4” thick fieldstone wall pieces, as I tend to use that thickness quite a bit.

'Broken' and assembled bricks.

Floor tiles and thin wall segments, 
and some debris.
I also have to tip my hat at the ingenious way the ’halved’ pieces of this mould have been sculpted. They fit together snugly to form a whole piece, and yet when separated really look like they have been broken apart. Some real ingenious designing has been employed here.

I have previously ordered my moulds directly from HirstArts, but this time I decided to try an European distributor, Foundations of War (Hirst Arts UK). The whole process went smoothly, and the cost including postage was about 10 euros cheaper compared to ordering a single mould directly from HirstArts.

One problem remains. Apart from floor tiles, this is my only fieldstone mould, and now I have a sudden craving for some other bricks of the fieldstone variety. Although there are some custom pieces I have wanted to do for a while, maybe it would be more productive to get some quality mould silicone.

maanantai 14. huhtikuuta 2014

New Painting - Heresy Cyclops

Heresy Narbrot - 'Classic' Cyclops
Here's the figure that was missing from the previous post about Heresy Cultists, the Cyclops, or rather a Demonspawn as he wants to be known in those circles. And yeah, he actually does have a pair of eyes, due to the head I chose for him.

I really like the way the skin tones came out with this figure, mainly perhaps because there was strong enough detail on the model. The pose is also simple but effective, and it would be quite easy to mod it to get quite a range of beasties out of it. The size hits also a sweet spot, being big enough to stand out of human-sized figures, but not too bulky or towering.


sunnuntai 13. huhtikuuta 2014

New Painting - Foundry Hydra

Okay, finally had time to finish the Foundry Hydra. Lots of dry brushing, even more ink washes (hence the glistening) and some awkward brush angles due to the placement of some of the heads. In the end, the result was somewhat more colourful than my usual palette, but it suits this model, if I say so myself.

lauantai 12. huhtikuuta 2014

New Painting - Cultists, from Heresy Miniatures

Here are some preliminary pics from Cultists faction for my Ruins & Ratmen game. All of the figures are from Heresy Miniatures. The Cultists themselves were a no-brainer, as they were the only line of fantasy cult members I could think of. The Mutants, however, are of Heresy's ghoul range, with some Reaper Miniatures Creature Components - tentacles, claws, etc. - added for good measure. I had had the ghouls for a long time, never having the inspiration to actually do anything with them, until I realised that with a bit of tweaking they are just what this warband would need. And actually, it was easier to add the Reaper bits than to pin the ghouls as intended.

As there were only three poses with the regular troop types, it was a  very easy decision to convert some of the models to get a bit more variety to the warband. I decided to to give them single handed weapons, essentially shortened versions of their pole arms, and since the standard (not yet painted) featured a shield design, adding that seemed a good fit for the unity go the band. I copied the design on Green Stuff, and made the shields I needed from that mould.


In addition to these figures, there's the standard bearer yet to be finished, and a demonspawn (a Heresy figure as well, their classic Cyclops), who missed this photo shoot. There is still some good Reaper bits left, so more mutants might be in order, or maybe another demonspawn if I find a suitable base model. Also, all of my war bands seem to have some sort of animal troops in them, so maybe some giant insects would fit the theme. Centipedes, perhaps?

sunnuntai 6. huhtikuuta 2014

Traveller Reskins: Scout. Type S PDF

The finalised version of the Scout, Type 1 can be found from the right sidebar, under Downloads (PDF). The PDF file contains 3 layers, one with the basic plan, one with 1,5 m grid, and one with some definitions. The file is restricted to print only. At least in my computer, the Dropbox preview redraws the file a bit funkily, but the downloaded file seems okay.